[Answer ID: 14195]
How to test the WAN port on Buffalo routers
Created 06/01/2012 10:20 | Updated 04/23/2014 08:33
Verify that the computer can get on-line, by removing the router from the equation.
- Put the router into Bridge mode.
- Have only one computer plugged into the router, then Verify that the computer can get on-line.
- If it does, then the WAN is fine.
If it does not, try power cycling the router & modem, and check the DIAG code.
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.